Get Together 2 Bluetooth® Speaker FAQs

• EM-JA030

• The size of this product is 13.1" x 4.6" x 4" (334 x 117 x 103mm)

• 4.85lbs (5.7 kg)

• Bluetooth Version 5

• ≥30m

• 2.5” woofer & 1” tweeter x 2
• Passive Radiator x 2

• USB-C to C (included)

• 15+ hrs

• Less than 2hrs using a minimum 27W adapter

• 20+ hrs

1. Turn on your device’s Bluetooth
2. Press and hold the Power button on the back for 2 seconds to power on/off
3. A blue LED light will blink to indicate pairing mode
4. Go to your device’s Bluetooth pairing menu and select “Get Together 2”

1. If you see no LED light, then the battery is fully charged
2. If you see a solid red LED light, then the battery is charging
3. If you see a blinking red LED, then the device has low battery

• Press and hold the Power button on the back for 2 seconds to power the device on/off

1. Press the Volume Down (-) button for volume down
2. Press the Volume Up (+) button for volume up

1. Press the Multi Function button (circle button) 1x to play/pause music, accept a call or end a call
2. Press and hold the Multi Function button (circle button) for 2 seconds to reject a call, activate voice assistant or make a call
3. Press and hold the Volume Down (-) button for 2 seconds to play the previous track
4. Press and hold the Volume Up (+) button for 2 seconds to play the next track
5. During a call, press the Multi Function button (circle button) 1x to accept another incoming call
6. During a call, press and hold the Multi Function button (circle button) for 2 seconds to reflect another incoming call
7. If on a call with another call on hold, press and hold the Multi Function button (circle button) for 2 seconds to switch back and forth between the two calls
8. Press the Multi Function button (circle button) 1x to end the active call and return to the call on hold

1. Press the “EQ mode” button (directly below the power button) to see the currently active EQ
2. Press the EQ mode button again within 8 seconds to cycle through the EQs until you find your desired EQ setting

EQ settings:

• “Signature Sound” – This is indicated by a white LED light
• “Bass Boost” – This is indicated by a green LED light
• “Acoustic” – This is indicated by a violet LED light

1. To use Stereo Pair Mode, you will need 2 speakers from the Get Together 2 Family
2. Please note that the original Get Together series speakers cannot pair to any Get Together 2 series speakers.
3. Place the speakers in proximity to each other for the pairing process
4. Power on both speakers
5. A tone will be heard indicating the speakers are ready to pair to each other
6. On each speaker, hold down the Skip Backward and Skip Forward buttons simultaneously for 2 seconds
7. A voice prompt will announce “left channel” and “right channel” on each corresponding speaker
8. Go to your device’s Bluetooth pairing menu and select “Get Together 2”
9. Your device will now be connected to both speakers

1. To use Multi Pair Mode, you will need at least 3 Get Together 2 speakers.
2. Please note that the original Get Together speakers cannot pair to any Get Together 2 speakers.  
3. Place the speakers in proximity to each other for the pairing process  
4. Power on all speakers  
5. Connect 1 of the 3 speakers to your device.
6. On each speaker, hold down the Skip Backward, Multi-Function and Skip Forward buttons simultaneously for 3 seconds  
7. A voice prompt from each speaker will announce “party mode.”  
8. Your device will now be connected to all 3 speakers  

• You can change the language by pressing and holding the “EQ mode” button (directly below the power button) for 2 seconds

• The box includes 1 Get Together 2, 1 braided USB-C to C charging cable, a quick start guide, a warranty booklet, a welcome card, and a House of Marley sticker.

• The Marley app cannot be used with the Get Together 2, as it is only compatible with the Redemption ANC 2 at this time.