GET TOGETHER DUO FAQ

Frequently Asked Questions

How do I use the RCA connection?

1. Before beginning, ensure the right speaker is fully charged. The right speaker will be labeled with an “R,” and it is a battery powered speaker.
  - The red LED will be on while charging and will go off when fully charged
2. If the right speaker is not charged, plug in the USB-C cable, and connect the speaker to a power source.
3. Plug an RCA cable into the left main-powered speaker
4. Connect the other end of the cable into your preferred audio device
5. Switch on the left (main-powered) speaker.
  - For RCA connections – press the power button twice to select RCA.
  - You will see a purple LED light when the speaker is in RCA mode.
6. Switch on the right (battery powered) speaker making sure that it is in Bluetooth mode
  - Once the LED light is flashing blue, that means it is ready to pair
7. If the speakers have never been paired before, follow the steps below. If they were already paired, proceed to the next step.
  - On the left speaker, press and hold the Bluetooth button until you hear a beep
  - Once you hear a beep, that means the speaker is looking to pair with the right speaker
8. The speakers will be paired when you hear an announcement that says “left channel, right channel”
9. Start playing audio from your device

How do I use the AUX input (AUX In)?

Note: When using the AUX input, True Wireless Sound is disabled, therefore you cannot pair two speakers with this type of connection.

1. Ensure the right speaker is fully charged
2. Plug in the USB-C cable and connect the speaker to a power source
3. Plug one end of the AUX cable into your audio device (e.g., mobile phone) and the other end into your speaker
4. Turn the speaker on and press the button once for AUX mode. You will see the second LED turn solid red.
5. Start playing audio from your device

How do I connect the Get Together Duo to my mobile device through Bluetooth?

Ensure the speakers are plugged in and the right speaker is fully charged. The right speaker will be labeled with an “R”, and it is a battery powered speaker.
- The red LED will be on while charging and will go off when fully charged
If the right speaker is not charged, plug in the USB-C cable and connect the speaker to a power source.
To pair your speakers, plug the power adaptor into the left (mains-powered) speaker
Switch on the left speaker by pressing and holding the power button for 2 seconds
Switch on the right (battery powered) speaker by pressing and holding the power button for 2 seconds
In a few seconds, the two speakers should pair together automatically
When paired, they will announce “left channel” “right channel”
If the speakers don’t pair in 10 seconds, press and hold the Bluetooth button on the left (main-powered) speaker for 5 seconds until you hear a beep.
The second LED light will flash red and blue while the speakers pair together
When paired, the speakers will announce “left channel” and “right channel”
- The speakers are now ready to pair with your mobile device
- Go into your device’s Bluetooth settings and click on “Get Together Duo x2”
- When the pairing request pops up, press “Pair” on your device
Your device will now be connected to the “Get Together Duo x2”
Begin playing audio from your device and enjoy!

How do I connect the Get Together Duo to the Stir It Up Wireless Turntable?

1. Ensure the speakers are plugged in and the right speaker is fully charged. The right speaker will be labeled with an “R”, and it is a battery powered speaker.
  - The red LED will be on while charging and will go off when fully charged
  - If the right speaker is not charged, plug in the USB-C cable, and connect the speaker to a power source.
2. To pair your speakers with the turntable follow the steps below:
  - Plug the power adaptor into the left (mains-powered) speaker and switch it on by pressing and holding the power button for 2 seconds
  - Switch on the right (battery-powered) speaker
    - In a few seconds, the two speakers should pair together automatically
  - When paired, the speakers will announce “left channel” and “right channel”
    - If the speakers don’t pair in 10 seconds, press and hold the Bluetooth button on the left (mains-powered) speaker for 5 seconds until you hear a beep
  - The second LED light will flash red and blue while the speakers pair together
  - The speakers will then announce, “left channel” and “right channel”
    - They are now ready to pair with your Stir It Up Wireless turntable
  - Plug the power cord into the socket on the back of the turntable
  - Switch the knob on the back of the turntable to “On”
  - Double click the Bluetooth button on the turntable to activate pairing mode
    - The LED will begin flashing blue to indicate it is in pairing mode
  - Press the Bluetooth button on the Get Together Duo to activate pairing mode
    - The LED will begin flashing blue to indicate it is in pairing mode
  - When paired, the blue LED on each device will stop flashing and the Get Together Duo will announce “Paired”
  - If the speakers do not pair within 5 seconds, repeat the last two steps again
3. Place a record on the turntable
4. Shift the RPM knob on the turntable to 33 or 45 (depending on the record you’re playing)
5. Shift the cue lever towards you to start the record
6. Place the stylus above the record and shift the cue lever away from you to lower the stylus
7. Enjoy the music!

How do I connect the Get Together Duo to the Stir It Up Turntable?

1. nsure the speakers are plugged in and the right speaker is fully charged. The right speaker will be labeled with an “R” and it is a battery powered speaker.
  - The red LED will be on while charging and will go off when fully charged
2. If the right speaker is not charged, plug in the USB-C cable and connect the speaker to a power source.
3. Grab an RCA cable and plug the red and white cable into the back of the turntable
4. Plug the free red cable into the back of the right speaker and the free white cable into the back of the left speaker
5. Plug the left speaker into the mains and press the power button to switch it on
  - The second LED light will now flash blue
6. Press the power button twice to select RCA mode.
  - The LED light will then turn solid purple
7. Switch the right speaker on and press the power button twice to select RCA mode, the second LED light will go solid purple
8. Set the pre-amp switch on the back of the turntable to on
9. Place a record on the turntable
10. Shift the RPM knob on the turntable to 33 or 45 (depending on the record you’re playing)
11. Shift the cue lever towards you to start the record
12. Place the cue lever away from you to lower the stylus
13. Enjoy the music!

How do I play different audio on each of my Get Together Duo speakers?

Note: to play different audio on each of your Get Together Duo speakers, you will need to play audio to one speaker with an AUX or RCA connection and the other speaker with a Bluetooth connection.

1. Ensure the speakers are plugged in and the right speaker is fully charged. The right speaker will be labeled with an “R”, and it is a battery powered speaker.
  - The red LED will be on while charging and will go off when fully charged
  - If the right speaker is not charged, plug in the USB-C cable, and connect the speaker to a power source.
2. Connect an AUX or RCA cable to the left speaker and to the device you would like to play music from
3. Switch the other speaker into Bluetooth mode by clicking the Bluetooth button on the speaker.
4. Go into your device’s Bluetooth settings and click on “Get Together Duo x2”
5. When the pairing request pops up, press “Pair” on your device
6. Your device will now be connected to the “Get Together Duo x2”
7. Begin playing audio from your devices and enjoy!

How do you charge the Get together Duo?

- You can charge the Get Together Duo with the provided A-C Micro USB charging cable.

What is the model name of Get Together Duo?

- EM-JA019-SB

What is the size of Get Together Duo?

- The size of this product is 5.1x4.1x8in (130x105x202mm)

What is the weight of Get Together Duo?

- 6.8lbs (3.1kg)

What type of cable should I use to charge the Get Together Duo?

- An A-C Micro USB + adaptor charging cable (provided with product)

What is the capacity of the batteries?

- 5200mAh

How long will the battery last when fully charged?

- The Get Together Duo provides 20 hours of playtime when fully charged.

What is included in the packaging for the Get Together Duo?

- The box includes Get Together Duo speakers, an RCA-to-RCA cable, a USB-C charging cable, the mains power cable, 2 AC adapters, a quick start guide, a warranty booklet, a welcome card, and a House of Marley sticker.

How do I pair the Get Together Duo to a different device?

1. On the left speaker, press and hold the Bluetooth button until you hear a beep
  - Once you hear a beep, that means the speaker is looking to pair with the right speaker
2. Go into your device’s Bluetooth settings and click on “Get Together Duo x2”
3. When the pairing request pops up, press “Pair” on your device
4. Your device will now be connected to the “Get Together Duo x2”

What are the recyclable pieces of Get Together Duo?

- Every piece of the Get Together Duo can be recycled at an e-waste recycling facility.

How do I recycle my product?

- House of Marley believes in respect for the earth, which is why we develop products with upcycled materials. Please contact your local e-waste recycling center for drop-off instructions. Unfortunately, due to the complex assembly of the earbuds, they cannot be placed in a standard recycle receptacle

Get Together Duo Homepage

Download Quick Start Guide

All Marley Product FAQs

House of Marley's eco-conscious identity was created in collaboration with the Marley family to carry on Bob Marley's legacy of love for music and planet. Our philosophy is built around the themes of sustainability and commitment to charitable causes, particularly those related to the environment.

Learn more...

Our Project Marley Global Giving initiative was created in honor of the legendary Bob Marley and his respect for the earth and people. In addition to creating audio products that are better for the earth, we are also devoted to supporting global reforestation via One Tree Planted

Learn more...

If you are not entirely happy with your purchase, we're here to help! Returns of merchandise purchased from this website may be made within 30 days of receipt for a full refund of cost of the merchandise.

Learn more...